Fire Protection System Design in Arizona
Craig Fire Protection evaluates your building and works with engineers to plan a fire protection system that fits your property and the requirements that apply to it.
Building new, renovating, or changing how a space is used? We help you start with the right design, then carry it through installation, testing, and ongoing service with the same team.
- On-Site Evaluation
- Coordinated With Engineers
- Design Through Installation
- Serving Arizona Since 1998
The Right System Starts With the Right Design
No two buildings need the same fire protection system. The layout, how the building is used, what is stored or cooked inside, and the water supply available all shape what the system has to do. A design that misses one of those can mean costly changes later, or a system that does not protect the space the way it should.
Our design work starts on site. We visit the property, collect the information that matters, and work with engineers to develop a system configuration based on your building's needs and the applicable codes. Because we also install, test, inspect, and maintain fire protection systems, the design is built with the full life of the system in mind.
We help building owners, developers, general contractors, engineers, and property managers. Common reasons people call us include new construction, a renovation or tenant improvement, a change in how a building is used, a new sprinkler requirement, a system upgrade, or the need to coordinate requirements between engineers, contractors, and the local authority.
What Our Design Service Covers
Every project is different, but our design work generally includes the following.
-
On-Site Evaluation
- A visit to the property to review the building and the project
- Data collection on layout, occupancy, hazards, and water supply
- Review of any existing fire protection equipment
-
System Design
- Design for fire sprinkler and kitchen hood suppression systems
- Development of a system configuration in coordination with engineers
- Shop drawings and hydraulic calculations when your project requires them
- Equipment selection suited to the building and its hazards
- Design based on applicable NFPA standards and local requirements
-
Project Coordination
- Coordination with general contractors, engineers, and other trades
- Communication with the local authority as your project requires
- Plan submittal to the fire authority for permit, when required
-
From Design to Service
- Installation by our own crews to the approved plans
- Testing and inspection support when the system is complete
- Ongoing inspection, maintenance, and upgrades after the project
Why Good Design Pays Off
Design decisions made early affect everything that follows: installation, inspections, and how well the system protects the building for years.
-
Built for Your Building
A design based on your actual layout, occupancy, hazards, and water supply fits the property instead of a generic plan.
-
Fewer Surprises Later
Getting the requirements right at the start helps avoid changes once installation is underway.
-
Supports Code Compliance
Designing to applicable standards from day one supports a code-compliant installation and a smoother path through inspections.
-
One Team From Plan to Service
The company that helps design your system also installs, tests, inspects, and maintains it.
Why Choose Craig Fire Protection for System Design
Design is where experience in the field matters most. Here is what we bring to your project.
-
Arizona Experience Since 1998
We have installed and serviced fire protection systems across Arizona since 1998, from homes and apartments to hospitals, hotels, warehouses, and retail stores.
-
Field Knowledge Behind Every Design
Our team also installs, inspects, and repairs fire protection systems, so design decisions are grounded in how systems are actually built and maintained.
-
We Work With Your Project Team
We coordinate with engineers, general contractors, building owners, insurance-related stakeholders, and local authorities to keep the project moving.
-
Licensed, Bonded, and Insured
Craig Fire Protection holds Arizona ROC license 366645 and is bonded and insured.
How Our Design Process Works
Here is what to expect from the first conversation to a completed system.
-
Tell Us About Your Project
Request a quote online or call (928) 453-7185. Share the type of project, the building, your timeline, and any plans you already have.
-
Site Visit and Data Collection
We visit the property and gather the details that shape the design, including layout, occupancy, hazards, and water supply.
-
Design With Engineers
We work with engineers to develop a system configuration that fits the building and the applicable requirements.
-
Quote and Coordination
You receive a quote for the work, and we coordinate with your contractor, engineers, and local authority as the project requires.
-
Installation, Testing, and Service
Our crews install the system to the approved plans, test it, and support required inspections. After that, the same team is available for ongoing service.
Designing Fire Protection for Arizona Buildings
Arizona buildings bring their own design questions. In Lake Havasu City and the Colorado River communities, extreme summer heat affects equipment choices in attics, warehouses, and other hot spaces. In the higher country around Flagstaff and Williams, freezing winter temperatures change how a system protects unheated areas.
Water supply varies too. A building in town on a municipal system and a property in a more rural area can have very different water supplies, and the design has to work with what is actually available.
Changes in use are common as communities grow. A storefront becomes a restaurant, a warehouse takes on taller storage, or an older building is renovated for a new tenant. Each of these can change what the fire protection system needs to do, and requirements differ between cities and fire authorities. Planning the system around the new use, before the work starts, helps keep the project on track.
Fire Protection Design Across Arizona
From our office in Lake Havasu City, we provide fire protection system design in Bullhead City, Fort Mohave, Kingman, Parker, and communities across Arizona.
Planning a project elsewhere in Arizona? Call (928) 453-7185 and we will let you know if we can help.
- Lake Havasu City
- Bullhead City
- Fort Mohave
- Kingman
- Golden Valley
- Parker
- Quartzsite
- Ehrenberg
- Yuma
- Flagstaff
- Prescott
- Yucca
- Chloride
- Williams
- La Paz Valley
Fire Protection System Design FAQs
When do I need fire protection system design?
Design is needed whenever a fire protection system is being added or significantly changed. That includes new construction, renovations and tenant improvements, changes in how a building is used, new sprinkler requirements, and system upgrades.
What goes into designing a fire protection system?
A design looks at the building's layout, how it is used, the hazards inside, and the water supply available, along with the applicable NFPA standards and local requirements. We gather that information on site and work with engineers to develop the system configuration.
Which systems do you design?
We design fire sprinkler systems and kitchen hood suppression systems. When your project requires them, we can also deliver shop drawings and hydraulic calculations and submit plans to the fire authority for permit.
Does changing how my building is used affect my sprinkler system?
It often does. A change in occupancy or hazard, such as turning a retail space into a restaurant or storing goods higher in a warehouse, can change what the sprinkler system needs to provide. Have the system reviewed before the change happens.
Do you work with my engineer and general contractor?
Yes. We coordinate with engineers, general contractors, building owners, and local authorities, and we can work alongside the team you already have on your project.
Can you install the system after it is designed?
Yes. Our crews install the system to the approved plans, test it, and support required inspections. We can also handle ongoing inspections, maintenance, and upgrades after the project is complete.
How much does fire protection system design cost?
Cost depends on the type of system, the size of your property, and the work needed. We do not publish set prices because every property is different. Request a quote or call (928) 453-7185, and we will price the work for your specific property.
Are you licensed, bonded, and insured?
Yes. Craig Fire Protection is licensed by the Arizona Registrar of Contractors under ROC 366645, and we are bonded and insured. Our work is performed by certified technicians.
Start Your Project With the Right Design
Planning new construction, a renovation, or a change in use? Talk with Craig Fire Protection early, and we will help you plan a system that fits your building. Request a quote online and our office will follow up during business hours, or call (928) 453-7185.